(Config: Intfc2 Gigabit Ethernet) Egress - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem
Front Panel Operation
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
Intfc2 Stream Timeout
0500 mS
For use in Dual Stream Mode only: Assign the period (in 100 mS increments) for a
primary connection failure to be present before switchover to the secondary connection
occurs by using the ▲ ▼ arrow keys. Press

(CONFIG: Intfc2 Gigabit Ethernet) Egress

Intfc2 Gigabit Egress:
Ena/Dis FEC IP
Select Ena/Dis, FEC, or IP using the ◄ ► arrow keys, then press
(CONFIG: Intfc2 Gigabit Ethernet) Egress
Intfc2 Egress Enable:
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys, then press
allow reception of the IP-encapsulated MPEG packets to the LAN (egress). Disable is selected
to turn off the egress packets to the LAN.
(CONFIG: Intfc2 Gigabit Ethernet) Egress
Intfc2 FEC
Ena/Dis Matrix
This menu allows enabling and configuration of the SMPTE 2022 / Pro-MPEG COP3 FEC
stream to the LAN. Select Ena/Dis or Matrix using the ◄ ► arrow keys, then press
(CONFIG: Intfc2 Gigabit Ethernet) Egress
Intfc2 Egress FEC:
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys, then press
selected to generate SMPTE 2022 / Pro-MPEG COP3 FEC IP packets to the LAN, in
addition to the stream of IP-encapsulated MPEG packets. Disable is selected to run off
the generation of FEC packets to the LAN.
( E)
( E)
5–33
Str Timeout
when done.
ENTER
.
ENTER
Ena/Dis
ENTER
FEC
FEC Ena/Dis
Revision 11
MN/CDM710.IOM
. Enable is selected to
.
ENTER
. Enable is
ENTER