Comtech EF Data CDM-710 Installation And Operation Manual page 140

CDM-710 Broadcast Satellite Modem
Ethernet Management
Redundancy
•
Use the dropdown menus to Enable or Disable redundanc or set switching as Manual or
Auto; click [Submit Unit Utilities] to save these new settings.
•
Click [Force 1:1 Switch] to execute a forced switchover of operation.
Date and Time
Type in the time in HH:MM:SS format, or the date in DD/MM/YY format, then click [Enter
Date/Time] to save these new settings.
Clocks
Use the dropdown menu to select the desired Modem Ref Frequency, then click [Submit
Clocks] to save this setting.
Unit
Use the dropdown menus to select the desired Test Mode and Test Pattern, then click [Submit
Unit Utilities] to save these new settings.
Circuit ID
Type in the desired text string, then click [Enter Circuit ID] to save this new parameter.
For details pertaining to the configuration parameters available on this page, refer to Chapter 5.
FRONT PANEL OPERATION.
6–20
Revision 11
MN/CDM710.IOM