Figure 6-7. Config Mdm | Interface Page (With Empty Slot) - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem
Ethernet Management
If there is no interface module present, as shown in Figure 6-7 the message "Interface Not
Installed." is displayed in place of an operable configuration window. In this example, a CDI-40
ASI Interface Module has been installed in Expansion Slot 1, while Expansion Slot 2 is empty:

Figure 6-7. Config Mdm | Interface page (with Empty Slot)

6–17
Revision 11
MN/CDM710.IOM