Comtech EF Data CDM-710 Installation And Operation Manual page 218

Broadcast satellite modem
Table of Contents

Advertisement

CDM-710 Broadcast Satellite Modem
Appendix A
Command
Arguments for
Parameter
(Instruction
Command or
Type
Code and
Response to
Qualifier)
Query
Gigabit
GMI=
17 bytes
Multicast
Address
Gigabit Active
N/A
2 bytes
Stream
Gigabit Source
GSI=
17 bytes
IP Address
Gigabit Stream
GSM=
2 bytes
Mode
Gigabit Primary
GSP=
2 bytes
Stream
Gigabit Stream
GTM=
2 bytes
Timeout Mode
Gigabit Stream
GTO=
3 bytes
Timeout
Description of Arguments
Command or Query.
Gigabit Multicast Address in the form smiii.iii.iii.iii, where:
s=Slot (1, 2)
m=Multicast Stream (1, 2)
i=IP Address
Command or Query.
Gigabit Active Stream in the form sm, where:
s=Slot (1, 2)
m=Stream (1, 2)
Command or Query.
Gigabit Source IP Address in the form smiii.iii.iii.iii, where:
s=Slot (1, 2)
m=Multicast Stream (1, 2)
i=IP Address
Command or Query.
Gigabit Stream Mode in the form sm, where:
s=Slot (1, 2)
m=Mode
1=Single Stream
2=Dual Stream (Redundancy Mode)
Command or Query.
Gigabit Primary Stream in the form sm, where:
s=Slot (1, 2)
m=Multicast Stream (1, 2)
Command or Query.
Gigabit Stream Timeout Mode in the form sm, where:
s=Slot (1, 2)
m=Mode
0 = Non-revertive
1 = Revertive
Note: Only used when in Dual Stream Mode. When in redundancy mode, this
parameter controls whether the Gigabit Interface switches back and forth
between the two input streams for a valid MPEG stream. Revertive (GSM =1 )
means the interface will switch back and forth between the two streams. Non-
revertive is a latching scheme where the interface will only switch to the
secondary stream.
Command or Query.
Gigabit Stream Timeout (Only used when in Dual Stream Mode) in the form stt,
where:
s=Slot (1, 2)
t=Timeout in 100 mS intervals (0 – 10)
A–44
MN/CDM710.IOM
Query
Response to
(Instruction
Response to Query
Command
Code and
Qualifier)
GMI=
GMI?sm
GMI=smiii.iii.iii.iii
GMI#
GMI?
GMI*
GSA=
GSA?s
GSA=sm
GSA#
GSA?
GSA*
GSI=
GSI?sm
GSI =smiii.iii.iii.iii
GSI#
GSI?
GSI*
GSM=
GSM?s
GSM=sm
GSM#
GSM?
GSM*
GSP=
GSP?s
GSP=sm
GSP#
GSP?
GSP*
GTM=
GTM?s
GTM=sm
GTM#
GTM?
GTM*
GTO=
GTO?s
GTO=stt
GTO#
GTO?
GTO*
Revision 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdm-710l

Table of Contents