2.5
Mounting the Router
2.5.1
Mount the router utilizing the printable drill guide - available for download at:
NOTE: Some screw locations may interfere with connectors. Ensure the screw positions selected to
not interfere with the Power Connector.
2.6
Connections
NOTE: Electric supply current for communication cables is dangerous. To prevent electric shock
while installing, moving or opening the device covers, cables should be disconnected and connected
as follows:
2.6.1
To Connect:
1.
Ensure that the power supply cable is not connected to the device
2.
Connect all data cables
3.
Connect all antennas
4.
Connect the power supply cable to the device
2.6.2
To Disconnect:
1.
Disconnect the power supply cable from the device
2.
Disconnect the data cables
2.6.3
Power
2.6.3.1
The VioNet 3000 Series Mobile Router is powered by a 12 to 24 VDC power source. To connect
the power source to the device, locate the 12-24 VDC connector on the back panel of the device
and insert the power cable.
Figure 7: Antenna Connections for the Wireless LAN
Figure 8: Mounting Plate Screw Locations
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com
VioNet 3000 Series Mobile Router | User Guide
www.apollovideo.com/support
Page 9