Troubleshooting - Apollo VioNet 3000 series User Manual And Instruction Manual
Vionet 3000 series mobile router
Hide thumbs
Also See for VioNet 3000 series:
- User manual and instruction manual (35 pages) ,
- Operating instructions (5 pages) ,
- Operating instruction (5 pages)
Table of Contents
Advertisement
03/07 10:09:49 omateo
03/07 10:26:29 rsanchez
03/07 10:27:06 user_name
03/07 10:30:06 root
Clean historic?(Yes/No) [No]? No
The definition of each of the fields is as follows:
Login:
6.6.9
Device Log
6.6.9.1
LOG, save
Provides troubleshooting information about the device operation for use by Apollo Video's technicians. The
information is displayed as a hexadecimal dumping.
log 1
0000 0000 0100 004A 0D0A 3031 2F30 312F
3030 2030 303A 3030 3A30 3020 392E 312E
3720 4D61 7220 3133 2032 3030 3220 3137
3A33 303A 3139 2062 7920 2020 6D62 6572
726F 6A6F 206F 6E20 204D 4245 5252 4F4A
4F32 007D
6.6.9.2
NVRLOG List
Allows the user to select the number of logs to be displayed on the console.
ELS+nvrlog list 5
11/20/12 17:13:32 -1- RESET:(CODE 0x00000003)
BIOS CODE VERSION: 04.06 START FROM FLASH L1 HW18
11/20/12 17:13:29 -5- FTP Reset
11/20/12 17:12:59 -5- FTP
11/20/12 17:12:35 -5- FTP server ready, access from 192.168.202.26
11/20/12 17:10:29 -5- FTP server ready, access from 192.168.202.26
ELS+
For each log displayed the following information is given: the date and the time the event took place, the
priority associated to the said log (between hyphens) and a text containing information relative to the event.
6.7
Troubleshooting
The router has a debug for the operations that it executes which is based on traces. The traces, by default,
are not shown as they have not been enabled. To debug problems using the traces, carry out the following
steps:
1.
Adjust the buffer.
2.
Enable the traces.
3.
View the traces.
4.
Trace filtering possibility.
5.
Disable traces.
These commands can be activated in the routers static monitoring and configuration in the events submenu.
6.7.1
Buffer Adjust
Buffer adjust is executed using the EV-BUFFER command.
REMOTE
LOCAL
REMOTE
REMOTE
Date:
Date (month/day) and time of access.
Name of user who has connected to the device. This field will appear blank if
there are no users created in the device.
Type:
Type of access executed by the user: through telnet (REMOTE) or console
(LOCAL).
Goodbye
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com
VioNet 3000 Series Mobile Router | User Guide
ES EH
Page 37
Advertisement
Table of Contents
Troubleshooting
