ANT.1 CELL1 MAIN Antenna
ANT.2 CELL1 DIVERSITY
The device incorporates two WWAN antenna connectors (ANT.1 and ANT.2) for each
module.
Depending on the technology used for the connection, either one (e.g. GPRS) or two
antennas (e.g. LTE) will be required.
The antenna for the ANT.1 (Main) connector is mandatory. The ANT.2 (Ext.Diversity)
antenna connector is optional.
For optimal performance, the ANT.2 Ext Diversity antenna should be disabled when not in
use.
When installing both the ANT.1 Main and the ANT.2 Ext. Diversity antennas, the
recommended minimum distance between them is 1 foot (1'). The maximum recommended
distance is 2 feet (2').
2.4
Connecting the WLAN (Wi-Fi) Antenna
NOTE: Wi-Fi Antenna cables are labeled "2.4 – 6 GHz"
Connect the antenna cable to the connectors labeled "Wi-Fi", located on the front panel of the device.
2.4.1
Page 8
Figure 4: Antenna Modules
Module 1
Antenna
Figure 5: Antenna Connections for WWAN 1 (with Diversity)
Figure 6: Antenna Connections for WWAN 2 (with Diversity)
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com
Module 2
ANT.1 CELL2 MAIN Antenna
ANT.2 CELL2 DIVERSITY
Antenna