Configuration - Apollo VioNet 3000 series User Manual And Instruction Manual

6.4.5.1
The activate option allows the user to program a specific time to reload the routing application
program. The time is configured in a 24-hour format.
*load activate
Current time: 17:21
Type time you want to reload the system [H:M]:17:22
Reload is timed at 17:22
Are you sure to reload the system at the configured time (Yes/No)? y
*
6.4.5.2
NOTE: If no loading has been programmed, an error message will appear.
*load deactivate
Reload is timed at 20:00
Are you sure to cancel the timed reload(Yes/No)? y
Timed reload was cancelled
*
6.4.5.3
*load immediate
Are you sure to reload the device(Yes/No)? y
*
6.4.5.4
*load ractivate
Current time: 17:26
Type time you want to restart the system [H:M]:17:27
Reload is timed at 17:27
Are you sure to restart the system at the configured time (Yes/No)? y
*
6.4.5.5
*load rdeactivate
Reload is timed at 17:00
Are you sure to cancel the timed restart(Yes/No)? y
Timed restart was cancelled
*
6.5

Configuration

6.5.1 Configuration Management
6.5.1.1
Page 24
Load Activate
Load Deactivate
The deactivate option allows cancellation of a pre-configured loading which has not as
yet been carried out.
Load Immediate
Reloads the application immediately.
Load Ractivate
Permits the user to program a specific time where the routing application program restarts.
The time is configured in a 24-hour format.
Load Rdeactivate
Permits the user to deactivate the programmed restart process. NOTE: If there is no
restart programmed, an error message will appear.
Save the Configuration
The SAVE command stores the configuration in the active storage unit.
If the command is not accompanied by parameters indicating the contrary, the operation
will request confirmation for the process. If the confirmation is positive, the selected
media will be accessed and the operation results will be displayed.
In cases where the active unit is made up of various medias, the operation will be carried
out over both as indicated in the final message.
When using the save command, it's essential to track which configuration is being saved.
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com