4.0
LED Indicators
The following figure shows the positions of the LEDs on the back panel of the device:
A
B
C
LNK
100
Page 18
Figure 26: Rear Panel LEDS
Wireless WAN interface channel 0 (CELL 1).
OFF:
Interface not available, not installed or not registered.
ON:
Registered, or registered and connected in the SIM operator Network.
- STEADY:
Not transferring data.
- FLASHING:
Transferring data.
Wireless WAN interface channel 1 (CELL 2).
OFF:
Interface not available, not installed or not registered.
ON:
Registered, or registered and connected in the SIM operator Network.
- STEADY:
Not transferring data.
- FLASHING:
Transferring data.
Wireless LAN interface (Wi-Fi)
OFF:
Interface not available, not installed or not established.
ON:
Connecting, or connected and communication established.
- STEADY:
Not transferring data.
- FLASHING:
Transferring data.
Associated to each Ethernet switch connector (LAN1, LAN2, LAN3 and LAN4)
ON
Ethernet link established.
- STEADY:
Not transferring data.
- FLASHING:
Transferring data.
Associated to each Ethernet switch connector (LAN1, LAN2, LAN3 and LAN4)
ON
Connected at 100 MHz
OFF:
Connected at 10 MHz
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com