Wireless Interface - Apollo VioNet 3000 series User Manual And Instruction Manual

7. Exit the BSS configuration.
Wlan1/0 bss Teldat WLAN config>exit
8. Exit the WLAN interface configuration.
wlan3/0 WLAN config>exit
In addition, you need to configure the Radius part. For further information on Radius configuration, please see
manual Dm733-I "Radius Protocol".
1. Access the Radius configuration menu.
Config>feature radius
-- RADIUS User Configuration --
RADIUS config>
2. Configure the Radius server address.
RADIUS config>primary-address 172.24.78.78
3. Configure the key for the Radius server.
RADIUS config>primary-secret whatever
4. Enable Radius.
RADIUS config>enable radius
RADIUS enabled
5. Exit the Radius configuration menu.
RADIUS config>exit
8.9

Wireless interface

8.9.1 Introduction
The router cellular interface is an interface that permits the connection of corporate networks to mobile
broadband networks.
This interface supports multiple technologies and bands.
Page 80
Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com