Protection Fuse; Figure 12: Command Line, Power Management; Figure 13: Protection Fuse - Apollo VioNet 3000 series User Manual And Instruction Manual

3.2

Protection Fuse

The VioNet 3000 Series Mobile Router has an internal protection fuse incorporated to prevent damage to
the device and to the surrounding area.
The following image, indicated in red, shows where the protection fuse is located (F1).
In cases where the device is not functioning, please check that the fuse is correctly installed and has not
blown.
NOTE: The nominal current for the fuse must be 3.15 A, Max Voltage 250 VAC, type FSF. The fuse
must have these characteristics.
3.2.1 Data Connection
The following data connectors are available:
3.2.1.1 Switch
The routers incorporate a 4 port Switch, 10/100BaseT with automatic MDI/MDIX to connect to a
local area network (LAN).
This device has a LINK LED indicating the state of the connection and a 100 LED indicating the
connection rate.
Page 12

Figure 12: Command Line, Power Management

Figure 13: Protection Fuse

Apollo Video Technology
th
Avenue Southeast – Bothell, WA 98021-8990
24000-35
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com