Auto provision
The phone supports plug and play installation and will automatically download its configuration
from the FortiVoice system. This section will allow you to specify an address of a configuration
server. By default, the phone will populate the URL field if it discovers a FortiVoice system on
the LAN. Using the Auto Provision settings will only be used if the phone an external extension.
To set a configuration server:
1. Enter a URL. This is the IP address or FQDN of the FortiVoice system.
2. Leave all other information blank.
3. Tap Save.
Reset Config
The Reset Config section allows you to reset the phone configuration to factory default.
FWD International
The FWD International setting allows calls to be forwarded to an international number when
using the Divert feature on an incoming call.
Reboot
Tap on this option to reboot the phone if necessary.
USB
The USB section can be accessed when a USB flash drive is connected to the phone. This is
where calls that have been recorded on the phone are stored.
Configuration Overview
Page 14
FortiFone User Guide