EPSON Stylus Photo R200/R210
2.3.9 APG Unit removal
o
External View
Shield Plate, M/B
C.B.S 3x6 (6-8kgf/cm)
Figure 2-18. "APG Unit" removal
o
Parts/Units which should be removed before removing "APG Unit"
Paper Support Assy./Housing (left/right)/Housing (frame)/ASF Unit/Board, Main
o
Disassembly Procedure
1.
Disconnect the APG motor connector cable from the connector (CN13) of
"Main Board"."
2.
Remove the screw (x1) for securing "APG Unit", and remove the "APG Unit"
carefully.
DISASSEMBLY AND ASSEMBLY
Left backside
APG Unit
Disassembly
o
When reassembling "APG Unit",
n
Make sure that the hooks (x2) and the dowels (x2) of "APG
Unit" are securely attached to "Frame, Main".
n
Check if the part indicated in the following figure is inserted
in the slits of "Frame, Main".
It has to be inserted in the
slit of "Frame, Main"
Dowel
Figure 2-19. "APG Unit" installation
Revision A
Hook
APG Unit
49