Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 20

EPSON Stylus Photo R200/R210
Occurrence
Timing Phenomenon Detail
Position of CR
At operation The leading edge of paper is not sent to
- "PF Roller".
* "Carriage Unit" can move to the home position even if "Extension Spring, 0.22" has come off or "PE Sensor" is not set in the correct position. However, in the next operation, a Paper Jam Error
will be detected since "PE Sensor Lever" will maintain the High signal status.
** There some cases where the jammed paper may damage "Print Head" by contacting the surface of "Print Head nozzle" when a Paper Jam Error occurs in each operation.
TROUBLESHOOTING
Table 1-7. Check Points for Paper Jam Error to Each Phenomenon
Faulty Part/
Part Name
1. Check if "Paper Guide, Upper" has not come off from
"Main Frame".
Paper Guide,
Upper
Unit Level Troubleshooting
Check Point
1. Reattach "Paper Guide, Upper" to "Main
Frame".
Paper Guide, Upper
Revision A
Remedy
20