Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 65

EPSON Stylus Photo R200/R210
o
External View (Cont.)
Frame, Cap
Extension
Spring, 0.788
Porous Pad, Slider, Cap
Shaft
Figure 2-42. "Ink System Unit" removal (2)
DISASSEMBLY AND ASSEMBLY
Lever, Lock, Slider
Slider, Cap
Extension
Spring, 0.441
Hooks
Hook
9. Remove "Extension Spring, 0.441" from the hooks of "Slider, Cap" and
"Frame, Cap" by using the tweezers.
10. Remove "Extension Spring, 0.788" from the hooks of "Lever, Lock, Slider"
and "Frame, Cap" by using the tweezers.
11. Remove the shaft of "Slider, Cap" from the slot of "Frame, Cap", then remove
"Lever, Lock, Slider".
12. Remove "Porous, Slider, Cap" from the hook of "Slider, Cap".
o
When reinstalling "Lever, Lock, Slider",
n
Check if it works properly working with "Slider, Cap".
o
When reinstalling "Ink System",
n
Make sure that the ink tube is correctly connected to the
point of "Frame, Cap" shown in the figure below. If it is not
connected properly, it may cause ink leakage.
Figure 2-43. Connecting Point for the ink tube
n
Do not touch the sealing rubber part and "Cleaner Head".
n
Make sure that the line mark of the ink tube is not twisted.
n
Check if "Cap Assy." moves smoothly.
Disassembly
Revision A
65