C265 Main Board Unit Removal - Epson Stylus COLOR 900 Service Manual

EPSON Stylus COLOR 900/900N

4.2.4 C265 Main Board Unit Removal

1. Disconnect the main wiring harnesses. (See
2. Remove the four screws securing the back cover to the printer.
Screws securing the Type B I/F Cover
Screws securing the Back Cover
Figure 4-7. C265 Main Board Removal
3. Remove the two screws securing the Type B interface cover to the
printer, and then remove the back cover.
4. Locate the two cables that connect the main board to the power
page 92.)
Chapter 4 Disassembly and Assembly
supply board. Disconnect the cables from their two connectors, CN2
and CN3, on the power supply board. Then slide the C265 Main
board out the back of the printer.
C A U T I O N
If you replace the C265 Main Board, perform all
necessary adjustments. (See Table 4-1.)
94