Carrier Unit (Carriage Assembly) Removal - Epson DFX-9000 Repair Manual

Epson DFX-9000 Field Repair Guide

Carrier Unit (Carriage Assembly) Removal

Note: The Mechanism, Print Head, Carriage Motor, and Platen Gap Assembly removal procedure must
be performed before performing the steps below.
1. Remove the four screws securing the Bearing Shaft Bracket.
2. Disengage the CES Scale (Timing Fence/Carriage Encoder Strip) from the CES Sensor by carefully flexing it
forward and away from the CES Sensor.
Component Replacement Printer Component, Software Item, LCD Display, Printer Button
3/29/07
Page 36.