EPSON Stylus Photo R200/R210
n
Screw "Printer Mechanism" and "Paper Guide, CDR" in
the order as shown in the figure.
n
Check if "Waste Ink Tube" is secured in the groove of
"Housing, Lower", then make sure that the line mark on the
tube is facing to the left. (Also make sure that it is not
twisted.)
Left
Figure 2-36. Installation position for "Ink Tube"
n
Make sure that "Waste Ink Tube" is not squashed or
pressed.
n
Check if "Cap Assy." moves smoothly.
o
When having replaced "Waste Ink Pads" with new ones,
implement the following adjustment. (Refer to Chapter 3
"ADJUSTMENT")
n
Waste Ink Pad Counter
DISASSEMBLY AND ASSEMBLY
Ink Tube (Image)
Groove of
"Housing, Lower"
Front
Disassembly
Revision A
60