EPSON Stylus Photo R200/R210
o
External View (Cont.)
Holder, Scale Left
E Ring
Flat Washer
Leaf Spring
E Ring
Flat Washer
Spring Washer
Hooks
Cable, Head
Holder, Shaft
Assy.
Hooks
Figure 2-23. "Carriage Unit" removal (2)
DISASSEMBLY AND ASSEMBLY
Bushing,
Holder, Scale, Right
Parallel
Adjust, Right
C.P.S (P4) 3x6
(6-8kgf•cm)
Fixed Spring,
CR Shaft,
Right
Cam, CR,
Right
Hook
E Ring
CR Guide Shaft
Cam, CR, Left
CR Guide Shaft
Disassembly
8.
Remove the E ring, "Holder, Scale Right" and "Cam, CR, Right" from the
right side of "CR Guide Shaft".
9.
Remove the screw (x1) for securing "Bushing, Parallel Adjust, Right". Then,
remove "Bushing, Parallel Adjust, Right".
10. Remove "Fixed Spring, CR Shaft, Right" from the hook of "Frame, Main".
Then, remove "Fixed Spring, CR Shaft, Right" from "CR Guide Shaft".
11. Remove the E ring, the plain washer and the leaf spring for securing "Holder,
Scale, Left".
12. Remove the E ring, the plain washer and the spring washer from the left side
of "CR Guide Shaft". Then, remove "Holder, Scale, Left"
13. Release "Cable, Head" from the hooks (x7) of "Holder, Shaft Unit".
14. Slide "CR Guide Shaft" to the right and pull it out from "Cam, CR, left".
Then, remove "Carriage Unit" and "CR Guide Shaft" together.
15. Pull out "CR Guide Shaft" from "Carriage Unit".
Revision A
52