The following table shows the adjustment items and their order for the replacement
parts.
Performance Priority
1
EEPROM
Data Copy
"ASF Unit" Removal
-
"ASF Unit" Replacement
-
"CR Motor" Removal
-
"CR Motor" Replacement
-
"Paper Guide Upper" Removal
-
"Paper Guide Upper"
-
Replacement
"Front Frame" Removal
-
"Front Frame" Replacement
-
"CR Unit" Removal
-
"CR Unit" Replacement
-
"Print Head" Removal
-
"Print Head" Replacement
-
"Main Board" Removal
-
"Main Board" Replacement
Required
(Read OK)
"Main Board" Replacement
(Read NG)
-
*1) The adjustment has been completed at the unit level of ASP supply. However, since "Main Board", "Print Head" and "ASF" are supplied separately, refer to the each item that corresponds to the part/
unit.
"Holder Shaft Unit" Removal
-
"Holder Shaft Unit"
-
Replacement
"CR Guide Shaft" Removal
-
"CR Guide Shaft" Replacement
-
ADJUSTMENT
Table 3-6. Adjustment Item
2
3
4
Market
USB ID
Waste Ink
Ink Charge
Setting
Input
Pad Counter
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Required
(Replacing
Required
Required
Waste Ink
Pads)
-
-
-
-
-
-
-
-
-
-
-
-
Adjustment Items and Overview
Note:
"Required" in this table indicates the adjustment items that must be implemented when the
corresponding parts/units have been removed or replaced. "Recommended", on the other
hand, indicates those which are recommended the adjustment after removing or replacing
them. "-" means the adjustment is not needed.
When having removed or replaced more than one part/unit, refer to the items that correspond