Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 56

EPSON Stylus Photo R200/R210
o
When replacing the following parts or components with new
ones, apply specified grease in its adequate dose. (Refer to
Chapter 4 "MAINTENANCE")
n
Cam, CR, Right/Left
n
CR Guide Shaft
n
Holder, Scale, Right/Left
n
Pulley, Driven Assy.
o
When having removed or replaced "Carriage Unit" or "CR
Guide Shaft", implement the adjustment in the following order.
(Refer to Chapter 3 "ADJUSTMENT")
1. PG Adjustment
2. First Dot Adjustment
3. PW Sensor Adjustment
4. Head Angular Adjustment (Only "Carriage Unit")
5. Bi-D Adjustment
6. Offset Input for CR Motor Calorific Limitation (When
Replace "CR Guide SHaft")
o
When having removed or replaced "PW Sensor", implement the
adjustment in the following order. (Refer to Chapter 3
"ADJUSTMENT")
1. PW Sensor Adjustment
DISASSEMBLY AND ASSEMBLY Disassembly
Revision A
56