EPSON Stylus Photo R200/R210
2.3.10 Paper Guide, Upper removal
o
External View
Paper Guide, Upper
Roller PF Assy.
Transparency
Rib
Figure 2-20. "Paper Guide, Upper" removal
DISASSEMBLY AND ASSEMBLY
Torsion Spring, 122.2
Paper Guide, Lower
Hooks
2
1
Hook
Rib
Dowels
Disassembly
o
Parts/Units which should be removed before removing "Paper Guide,
Upper"
Paper Support Assy./Housing (left/right)/Housing (frame)/ASF Unit/Board, Main/
Holder, Shaft Unit
o
Disassembly Procedure
1.
Move "Carriage Unit" to the home position.
2.
Put a transparency between "Paper Guide, Upper" and "Roller PF Unit".
3.
Release "Torsion Spring, 122.2" (x3) from the hook (
Main", then pull it out to the front.
2
4.
Release the hooks (
: 2 each) for securing "Paper Guide, Upper" (x3) to
upward. Then, release the dowels (2 each) while slightly holding up "Paper
Guide, Upper".
5.
Press down "Paper Guide, Lower" and pull out "Paper Guide, Upper" (x3) to
the front while stepping it aside the ribs (2 each) of "Frame, Main"
o
When reinstalling "Paper Guide, Upper",
n
There are 2 types of "Driven Rollers" of "Paper Guide,
Upper". Install them as shown in the following figure.
Driven Roller (Grey)
Figure 2-21. Installation Position of "Paper Guide, Upper"
Revision A
1
: 1 each) of "Frame,
Driven Roller (White)
50