Mp Tray Paper Load Unit; Front Bearing For The Mp Tray Paper Load Unit Removal; Mp Tray Paper Load Unit Removal - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000

4.2.15 MP Tray Paper Load Unit

4.2.15.1 Front Bearing for the MP Tray Paper Load Unit
Removal
1. Remove the Front Cover. (See "Front Cover Removal" on page -142.)
2. Remove the Front Inner Cover. (See "Front Inner Cover Removal" on
page -143.)
3. Remove 1 screw securing the Front Bearing.
4. Remove the Front Bearing for the MP Tray Paper Load Unit.
Figure 4-36. Front Bearing for the MP Tray Paper Load Unit
Disassembly and Assembly

4.2.15.2 MP Tray Paper Load Unit Removal

1. Remove the Rear Controller Cover. (See "Rear Controller Cover Removal"
on page -145.)
2. Remove the Rear Cover. (See "Rear Cover Removal" on page -146.)
3. Remove the Front Bearing. (See "Front Bearing for the MP Tray Paper
Load Unit Removal" on page -160.)
4. Remove 1 screw securing the rear bearing.
5. Disconnect the harness for the MP Tray Paper Load Unit from the
connector on the MCU.
6. Watching out for the spring, remove the front and rear bearing, and remove
the MP Tray Paper Load Unit.
Figure 4-37. MP Tray Paper Load Unit Removal
Disassembling Procedure
Revision E
160