Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 24

EPSON Stylus Photo R200/R210
Table 1-11. Check Points When More Than One Paper is Fed Constantly Without LED/STM3's Error Notifications
Occurrence Timing
Phenomenon Detail
Position of CR
The printer always feeds more than one
At operation
sheet of paper without LED/STM3's
-
error notifications.
Occurrence Timing
Phenomenon Detail
Position of CR
Abnormal sound is heard in spite of the
normal print operation at the first power
on or some other time.
Any time
The bottom of "Carriage Unit" touches
Anywhere
the surface of "Front Frame".
"Carriage Unit" strikes on "Paper Guide,
Upper" while "Carriage Unit" is
working.
TROUBLESHOOTING
Faulty Part/
Part Name
1. Check if "Roller, Retard Assy." works correctly while
feeding paper.
ASF Assy.
Table 1-12. Check Points for Abnormal Sound
Faulty Part/
Part Name
1. Check if there is enough grease on "CR Guide Shaft".
Carriage Unit
1. Check if "Lever, Change" moves smoothly.
Ink System
1. Check if "Frame EJ Assy." is not warping upward.
Frame EJ Assy.
1. Check if "Paper Guide, Upper" has not come off from
Paper Guide,
"Main Frame".
Upper
Unit Level Troubleshooting
Check Point
1. Reassemble "Extension Spring, 0.45" on the
back of "Roller, Retard Assy."
Extension Spring,
Check Point
1. Wipe the remaining grease off "CR Guide
Shaft" and reapply some grease.
1. Replace "Ink System" with a new one.
1. Replace "Frame EJ Assy." with a new one.
1. Reassemble "Paper Guide, Upper" to "Main
Frame".
Revision A
Remedy
0.45
Remedy
24