Epson Stylus Photo R200 Start Here Manual
Epson stylus photo r200: quick start
Hide thumbs
Also See for Stylus Photo R200:
- Service manual (101 pages) ,
- Printer basics manual (88 pages) ,
- User manual (12 pages)
Table of Contents
Advertisement
Quick Links
Start Here
EPSON Stylus
1
Unpack
1
Remove everything from the box.
Power cord
2
Remove any tape and packing material inside and around the printer.
The tape may be in slightly different places on your printer, so check
carefully.
3
Lift the printer cover and remove the tape securing the ink
cartridge holder.
2 2
Power On
1
Connect the printer's power cord
to the printer, then plug it into a
grounded electrical outlet.
2
Press the printer's power
comes on.
Caution: Use only the printer's
printer on and off.
Printer
Small CD insert
button until the green power light
Photo R200
®
Software
CD-ROM
CD/DVD tray
CD position
check disk
power button to turn the
Printer Basics
Ink cartridges
Remove tape
Advertisement
Table of Contents
Related Manuals for Epson Stylus Photo R200
Summary of Contents for Epson Stylus Photo R200
-
Page 1: Start Here
Small CD insert Power cord Remove any tape and packing material inside and around the printer. The tape may be in slightly different places on your printer, so check carefully. Lift the printer cover and remove the tape securing the ink cartridge holder. -
Page 2: Install Ink Cartridges
Install Ink Cartridges Flip open the paper support and pull up the extension. Lift the printer cover. Open the output tray and pull out the extension. Unwrap the ink cartridges. Open the cartridge cover and remove the paper insert. Lower each cartridge into its holder with the green circuit board facing the front. -
Page 3: Connect The Printer
Caution: Don’t turn off the printer while the green is flashing, unless the printer hasn’t moved or made noise for more than 5 minutes. Connect the Printer Make sure your computer is turned off. Keep it turned off until section 6, “Install Software.”... -
Page 4: Install Software
Note: If a screen like this doesn’t appear, make sure your printer is turned on and connected. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. Click Next on the Add New Hardware Wizard Screen. -
Page 5: Windows 2000
Note: If a screen like this doesn’t appear, make sure your printer is turned on and connected. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. Click Next on the Found New Hardware Wizard Screen. - Page 6 Make sure your printer is connected and turned on. Then turn on your Macintosh. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. If the CD-ROM window doesn’t open automatically, double-click the SPR200 CD-ROM icon.
-
Page 7: Mac Os X
Select EPSON USB from the pull-down list, click Stylus Photo R200, then select All from the Page Setup drop-down list. Click Add. You see the printer list with the Stylus Photo R200 and Stylus Photo R200(Sheet Feeder - Borderless) printer options. - Page 8 EPSON Stylus Photo R200 in SoundAdvice. How To Get Paper and Ink Use genuine EPSON inks and paper to get the best results from your EPSON printer! You can purchase ink cartridges, paper, and accessories from your local retailer or from the EPSON Store www.epsonstore.com (U.S.