Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 29

EPSON Stylus Photo R200/R210
Occurrence Timing
Phenomenon Detail
Position of CR
The paper is stained with the ink.
At operation
-
The upper edge of the paper gets
creased.
TROUBLESHOOTING
Table 1-13. Check Points for Defective Print Quality
Faulty Part/
Part Name
1. Check if there is any ink adhesion on "Frame EJ Assy.".
Frame EJ Assy.
1. Check if "Frame EJ Assy." has not warped upward.
1. Check if there is any ink adhesion on "Paper Guide,
Front".
Paper Guide, Front
2. Check if "porous pad" of "Paper Guide, Front" has not
come off.
1. Check if there is any ink adhesion on "Roller EJ Assy.".
Roller EJ Assy.
1. Check if there is any ink adhesion on "Paper Guide,
Paper Guide,
Upper".
Upper
1. Check if there is any ink adhesion on "PF Roller".
PF Roller
1. Check if the wiping operation has been performed
Ink System
correctly.
1. Check if there is any ink adhesion on "Print Head Cover". 1. Clean the ink adhesion on "Print Head Cover"
Print Head
1. Check if "Hopper Pad" is stuck to "Hopper" correctly.
ASF Assy.
Unit Level Troubleshooting
Check Point
1. Clean the ink adhesion on "Frame EJ Assy."
with a soft cloth.
1. Replace "Frame EJ Assy." with a new one.
1. Clean the ink adhesion on "Paper Guide,
Front" with a soft cloth.
2. Reattach "porous pad".
1. Clean the ink adhesion on "Roller EJ Assy."
with a soft cloth.
1. Clean the ink adhesion on "Paper Guide,
Upper" with a soft cloth.
1. Clean the ink adhesion on "PF Roller" with a
soft cloth.
1. Replace "Ink System" with a new one.
with a soft cloth.
1. Replace "ASF Assy." with a new one.
Revision A
Remedy
29