Manually Performing 2-Sided Copying Using The Adf; Manually Performing 2-Sided Copying Using The Exposure Glass - Ricoh SP C250SF Operating Instructions Manual

4. Copying Originals
2Sd 2Orig->Comb 2on1 2Sd
Copies both sides of one 2-sided original to one side of a sheet, and both sides of another 2-sided
original to the other side of the sheet.
2Sd 4Orig->Comb 4on1 2Sd
Copies four 2-sided originals to one sheet with four pages per side.
Manual 2 Sided Scan Mode
Select this mode to make 2-sided copies using the exposure glass.

Manually Performing 2-Sided Copying Using the ADF

• Make sure the same number of pages will be printed on the front and back of all sheets.
Otherwise, the job will be reset.
1. Press [Dup/Comb].
2. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK] key.
3. Press the [ ] or [ ] key to select paper orientation and page order, and then press the
[OK] key.
4. Place all 2-sided originals into the ADF with their fronts facing up.
5. Press the [B&W Start] key or [Color Start] key.
6. After all originals are delivered, place them into the ADF again with their fronts facing
down.
7. Press the [B&W Start] key or [Color Start] key again.
Use the same mode (color or black-and-white) for both sides.
After all pages have been scanned, copying starts.
• After you place the originals, press the [B&W Start] key or [Color Start] key within the time
specified in [System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 228
"Administrator Settings".
• If the memory becomes full while originals are being scanned, the job is canceled.

Manually Performing 2-Sided Copying Using the Exposure Glass

• If you print odd-number pages while using [Manual 2 Sided Scan Mode], you cannot print the last
page. In this case, print the last page with [Dup/Comb] set to [Off].
114