1.
Insert your USB flash disk into the USB flash disk port.
1
2
2.
Press the [Scanner] key.
"Loading..." appears on the display. Wait until the display changes to show "Save Scn Data to
USB" (the duration depends on your USB flash disk).
3.
Place the original on the exposure glass or in the ADF.
If necessary, configure advanced scan settings. For details, see page 118 "Specifying the Scan
Settings".
4.
Press the [B&W Start] key or the [Color Start] key.
To scan in black and white, press the [B&W Start] key.
DAC031
DAC507
DAC519
Basic Operation
133