Table of Contents
Advertisement
Specifying 2 Sided Copying
1.
Press the [Copy] key.
2.
Press the [ ] or [ ] key in the standby mode screen to select [2 Sided Copy], and then
press the [OK] key.
3.
Press the [ ] or [ ] key to select [Top to Top] or [Top to Bottom], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select the orientation, and then press the [OK] key.
5.
Press the [ ] key to return to the initial screen.
6.
Place the original on the exposure glass or in the ADF.
7.
To make multiple copies, enter the number of copies using the number keys.
8.
Press the [Start] key.
When you place the original in the ADF, all the pages are automatically scanned and then only the
pages on one side are copied sequentially. Proceed to Step 10.
When you place the original on the exposure glass, perform the following steps to scan the
subsequent pages.
9.
When the current page is scanned, place the next page on the exposure glass, and then
press the [Start] key.
CTT124
CTT131
Making 2-sided Copies
69
Advertisement
Table of Contents
