8. Configuring the Machine Using Web Image Monitor
Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], [Energy Saver Mode], and [PCL6 Mode].
Administrator Tab
Administrator Settings
Item
Change Password
New Password
Confirm New Password Enter the same password again, to confirm.
Change E-mail Address Check this to configure the administrator e-mail address.
Administrator E-mail
Address
• Administrator e-mail address can only be configured with the Type 2 model.
Reset Settings Tab
Reset Settings
Item
Reset Network Settings
Reset Menu Settings
Clear Scan Destination
268
Check this to configure the administrator password.
Enter the new administrator password. Can contain up to 16 characters.
Enter the administrator e-mail address.
If the machine's e-mail address is not configured in the [SMTP] page, this
address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails and Internet Faxes. Can contain up to
64 characters.
Select to restore settings configured under the [Network Settings] and
[Administrator Tools].
Select to restore settings that are not related to the network to their defaults.
Select to clear the scan destinations.
Description
Description