Ricoh SP C250SF Operating Instructions Manual page 196

7. Configuring the Machine Using the Control Panel
Density
Specifies the image density for photocopying.
Increase the level (black squares) to increase the density.
Default: The default setting is the middle of 5 adjustment levels.
Reduce/Enlarge
Specifies the percentage by which copies are enlarged or reduced.
Default: [100%]
(mainly Europe and Asia)
50%, 71%, 82%, 93%, 100%, 122%, 141%, 200%, 400%
(mainly North America)
50%, 65%, 78%, 93%, 100%, 129%, 155%, 200%, 400%
• ID Card Copy
Sets the machine to copy the front and back sides of an ID card, or other small document,
onto the front of a single sheet of paper.
• Zoom 25-400%
Color Adjustment
Specify the color balance of red, green and blue.
Increase the level (black squares) to increase the color brightness.
Default: The default setting is the middle of 5 adjustment levels.
Duplex/Combine
Specifies combined copying. Select a copy mode according to your original and how you want
the printed copies to appear. In [Manual 2 Sided Scan Mode], use the exposure glass to copy the
original. Otherwise, use the ADF. For more details, see page 109 "Copying Single-Sided Originals
with 2-Sided and Combined Printing" and see page 113 "Copying 2-Sided Originals with 2-Sided
and Combined Printing (Manual 2-Sided Copying)".
Note that enabling combined copying automatically disables ID card copying.
Default: [Off]
• Off
• 1Sd 2Orig->Comb 2on1 1Sd
Copy will be made on 1 side, on which 2 pages of 1-sided original will be printed.
• Portrait
• Landscape
• 1Sd 4Orig->Comb 4on1 1Sd
Copy will be made on 1 side, on which 4 pages of 1-sided original will be printed.
194