Checking The Printer Driver Settings - Ricoh SP C250SF Operating Instructions Manual

10. Troubleshooting

Checking the printer driver settings

Problem
The printed image is smudged.
Images smudge when rubbed.
(Toner is not fixed.)
The printed image is different from
the image on the computer's display.
When printing graphics, the output
and the screen are different.
Images are cut off, or excess is
printed.
Photo images are coarse.
A solid line is printed as a dashed
line or appears blurred.
310
PCL 5c/6
On the printer driver's [Paper] tab, select [Bypass Tray] in
the "Input Tray:" list. In the "Paper Type:" list, select a
proper paper type.
PostScript 3
On the printer driver's [Paper/Quality] tab, select
[Bypass Tray] in the "Paper Source" list. In the "Media"
list, select a proper paper type.
PCL 5c/6
On the printer driver's [Paper] tab, select a proper paper
type in the "Paper Type:" list.
PostScript 3
On the printer driver's [Paper/Quality] tab, select a
proper paper type in the "Media" list.
Only when using PCL 5c/6
On the printer driver's [Print Quality] tab, select [Raster]
in the "Graphics Mode" list.
To print accurately, specify the printer driver setting to print
without using the graphics command. For details about
specifying the printer driver setting, see the printer driver Help.
Use the same size paper selected in the application. If you
cannot load paper of the correct size, use the reduction
function to reduce the image, and then print. For details about
the reduction function, see the printer driver Help.
Use the application's or printer driver's settings to specify a
higher resolution.
For details about the printer driver's settings, see the printer
driver Help.
Change the dithering settings on the printer driver. For details
about the dithering settings, see the printer driver Help.
Solution