2. Loading Paper
Right
Left
Bottom
Placing Originals
This section describes the procedure for placing originals on the exposure glass and in the ADF.
• Do not place originals before any correction fluid and toner has completely dried. Doing so may
make marks on the exposure glass that will appear on copies.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
Placing Originals on the exposure glass
1.
Lift the ADF.
Be careful not to hold the ADF input paper tray when lifting the ADF. Doing so may damage the
tray.
84
In copier mode
3 mm (0.1 inches)
3 mm (0.1 inches)
4 mm (0.2 inches)
In scanner mode
0 mm (0 inches)
0 mm (0 inches)
2 mm (0.08 inches)
In fax mode
1 mm (0.05 inches)
(Letter, Legal)
0 mm (0 inches) (other
sizes)
1 mm (0.05 inches)
(Letter, Legal)
0 mm (0 inches) (other
sizes)
2 mm (0.08 inches)