Configuring The Network Settings; Network Status Tab - Ricoh SP C250SF Operating Instructions Manual

Configuring the Network Settings

Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application],
[DNS], [Auto E-mail Notification], [SNMP], [SMTP], [POP3], [Internet Fax], and [Wireless].
• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.

Network Status Tab

General Status
Item
Ethernet Speed
IPP Printer Name
Network Version
Ethernet MAC Address
Active Interface
TCP/IP Status
Item
DHCP
IP Address
Subnet Mask
Gateway
Shows the type and speed of the network connection.
Shows the name used to identify the machine on the network.
Shows the version of the machine's network module (a part of the machine
firmware).
Shows the Ethernet MAC address of the machine.
Shows the active communication method.
Select whether the machine should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
Enter the IPv4 address for the machine.
Enter the subnet mask of the network.
Enter the IPv4 address of the network gateway.
Configuring the Network Settings
Description
Description
253