Ricoh SP C250SF Operating Instructions Manual page 188

6. Sending and Receiving a Fax
Registering the Special Senders
This section explains how to register Special Senders.
Up to 30 Special Senders can be registered.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Special Sender].
3. From the [Destination Type] list, select [Special Sender].
4. Select the Special Sender number from the list (1 to 30).
5. Enter the Special Sender's fax number (up to 20 characters).
6. Enter the administrator password if required.
7. Click [OK].
8. Close the Web browser.
• A fax number can contain 0 to 9, , and space.
Limiting the incoming faxes
This section explains how to set the machine to receive (or reject) faxes only from the programmed
Special Senders.
1. Start the Web browser, and access the machine by entering its IP address.
186