Ricoh SP C250SF Operating Instructions Manual page 41

Current job
Receiving a LAN-Fax job from
a computer
LAN-Fax transmission
*1 Printing starts after scanning is finished if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or
when printing from the PostScript 3 printer driver.
*2 Scanning is not possible if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*3 Fax transmission is not possible if [Gradation:] is set to [Fine] (PCL printer driver), or when printing from the
PostScript 3 printer driver.
*4 PictBridge printing might fail if the free memory space is low.
*5 Printing may be canceled if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*6 Fax printing may take longer than normal if you scan using the control panel at the same time, especially
when scanning multiple pages using the exposure glass.
*7 Scan to USB is not available with PictBridge.
• If you try to use a function that cannot be performed simultaneously, you will hear a beep sound
from the machine or see a failure message pop up on your computer screen. In this case, try again
after the current job is finished.
Types of jobs that can be executed simultaneously
• Copying
• Scanning (except for TWAIN scanning)
• Fax immediate printing
• Fax memory reception
• Printing a fax received in the machine's memory
• Internet Fax reception
• PictBridge printing
• LAN-Fax transmission
• Copying
• Scanning (except for TWAIN scanning)
• Scanning a fax into the machine's memory before transmission
• Printing a fax received in the machine's memory
• Internet Fax reception
• Internet Fax transmission
• Printing
• Receiving a LAN-Fax job from a computer
Initial Setup
39