Fig. 10-4 Installing the Rear Shroud Assembly - Routing
4. Push the rear shroud down to engage the rear shroud
assembly with the pegs on the battery box.
5. Rotate the top of the rear shroud assembly all the way
forward and push down to engage securely with the
battery box.
60101916-A
other cables
10.4.2 Removing/Installing the Front Shroud Assembly
Seat assembly not shown for clarity.
Removing the Front Shroud Assembly
1. Verify the joystick On/Off switch is in the Off position.
2. Use a 10mm socket to remove the two (2) bolts A
securing the front shroud assembly B to the front of the
battery box.
3. Lift the front shroud assembly up off of the battery box
tabs C and pull towards the front of the wheelchair to
release from the battery box.
Installing the Front Shroud Assembly
10 Service
77