Table of Contents
Advertisement
5.3
Installing/Removing Front Riggings
Installing
1.
Turn the front rigging assembly to the side.
2.
Install the hinge plates on the front rigging assembly onto the hinge
pins on the wheelchair frame.
When performing STEP 3, it may be necessary to
pull release lever toward front of chair to assist the
front rigging to lock in place.
3.
Push the front rigging assembly towards the inside of the wheelchair
until it locks into place.
The footplate will be on the inside of the
wheelchair when locked in place.
4.
Repeat this procedure for the other front rigging assembly.
5.
To release the front rigging, push the front rigging release lever
inward, rotate front rigging outward.
Removing
1.
Push the front rigging release lever inward.
2.
Rotate swingaway front rigging assembly outward.
3.
Lift the swingaway front rigging assembly off the hinge pins.
Part No. 1110550
Hinge
Pins
Swingaway footrest shown
FIGURE 4
35
5 OPERATION
Front Rigging
Release Lever
Front Rigging
Assembly
Hinge
Plates
Installing/Removing Front Riggings
Invacare® Tracer® SX5 Wheelchair
Footplate
Advertisement
Table of Contents
