Adjusting The Speed; M50 And M51 Wheelchairs - Invacare Pronto M50 Owner's Manual

SECTION 5—WHEELCHAIR OPERATION
To drive the wheelchair, perform the following:
1. Turn the power on. Refer to Turning the Power On/Off on page 30.
2. Adjust speed. Refer to Adjusting the Speed on page 32.
3. Maneuver the joystick in the following manner:
MOVEMENT
FORWARD
REVERSE
Turn RIGHT
Turn LEFT
STOP

M50 and M51 Wheelchairs

To Move Left
Joystick
To Move
Backward
FIGURE 5.3 Using the Joystick to Drive the Wheelchair

Adjusting the Speed

M50 and M51 Wheelchairs
NOTE: For this procedure, refer to FIGURE 5.4.
1. Turn the speed control knob to adjust
the speed:
• Clockwise - Increase speed.
• Counterclockwise - Decrease speed.
Pronto® M50™, M51™and M61™with SureStep™
Push forward on the joystick.
Pull back on the joystick.
Move the joystick RIGHT.
Move the joystick LEFT.
Release the joystick and the wheelchair will quickly slow down.
To Move
Forward
To Move
Forward
To Move
Right
To Move Left
32
ACTION
M61 Wheelchairs
Speed
Control
Knob
FIGURE 5.4 M50 and M51 Wheelchairs -
M50 and M51 Wheelchairs
Joystick
To Move
Right
To Move
Backward
Part No. 1125085