Specifying The Settings; Specifying The Setting For Selecting Paper When Printing Received Documents (Mode 302); Factory Settings; Specifying The Setting For Selecting Paper When Printing Received Documents - Konica Minolta bizhub C200 Network Administration Manual

3
Maximum length that is discarded:
When the received document is longer than the printable area of the paper, if the excess is shorter than the
length specified here, it is discarded. (If it is longer, the document is either reduced or split onto different
pages.)
- If the excess is less than the maximum discarded length, it is discarded, regardless of whether bit 1 is
set to "1" or "0".
- The document is reduced if the excess fits within the reduction ratio range specified by bits 4, 3 and 2
when bit 1 is set to "0".
- The excess is printed on a separate page if it does not fit within the reduction ratio range specified by
bits 4, 3 and 2 when bit 1 is set to "0". If bit 1 is set to "1", the excess is printed on a separate page.
Maximum reduction ratio:
Since excess longer than the length specified by bits 7, 6 and 5 is reduced to fit within the paper, specify the
maximum of this reduction ratio. (Available only if bit 1 is set to "0" while printing received documents.)
For example, if "90%" is specified, it is reduced to a range of 100 % to 90%. The excess is printed on a
separate page if it does not fit within the printable area of the page with the maximum reduction ratio specified
here.
Process performed on the trailing end:
Specify whether the document is reduced or the excess is discarded when the received document is longer
than the printable area of the paper. (Available only when printing received documents.) The settings for bits
7, 6 and 5 and bits 4, 3 and 2 become available by specifying this setting.
3.5.15

Specifying the setting for selecting paper when printing received documents

(mode 302)
Specify the settings for selecting paper when printing received documents.

Factory settings

Factory settings
Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 Specify how to determine whether or not there is paper.
(Available only when printing received documents.)
6-3 Specify the paper size according to the received image.
(Available only when printing received documents.)
2-0 -
3-28
Specifying machine functions (software switch settings)
7654 3210
0000 0000 (HEX: 00)
Settings Details
0 Paper priority method (de-
termined by whether or not
there is paper)
1 Paper tray priority method
(determined by the tray pa-
per size setting or the previ-
ous paper information,
regardless of whether or not
there is paper)
0000 Selects the appropriate pa-
per from all loaded paper.
Others *Do not specify any settings
other than those mentioned
above.
000 *Do not change the settings
for these bits.
bizhub C200