Resending - Konica Minolta BIZHUB 350 User Manual

4
No. Item
4 Transmission result
5 Transmission Image

Resending

You can resend up to 20 failed transmissions.
1
Touch [Job List], then [Type], and then select the document that could
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the
document does not need to be scanned again.
2
To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
4-30
Description
Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations
failed.
Error code: For details, refer to "Network error list"
on page 12-4.
Prints a part of the sent image.
bizhub 350/250 (Phase 2.5)
Scan to E-Mail