Upgrade/Status; Upgrade/Start Transfer; Upgrade/Abort Transfer; Upgrade/Tftp Server - ADTRAN Express L128FP User Manual

»» Upgrade/Status
This appears when TFTP is used. It displays the status of the transfer
as it happens. Any error or success message will be displayed here.
»» Upgrade/Start Transfer
This activator is used when the configurable items in this menu are
complete.
Once started, the Express L128FP will prompt for erasing the
flash. When the flash is erased and the upgrade transfer fails,
do not turn off the unit. Retry the transfer until successful.
Otherwise, if power is removed before upgrade has finished,
the upgrade will have to occur from the maintenance port
using XMODEM. If this happens, set a PC terminal
emulation program to 9600 baud and attach to the Express
L128FP's maintenance port. Press
terminal menu for upgrading. This menu appears when the
flash code has been erased or is corrupt. The menu will also
appear if you power up with the back panel switch one in the
up position.
»» Upgrade/Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
»» Upgrade/TFTP Server
Setting this to Yes allows another Express L128FP to upgrade its code
using TFTP client. This, in effect, turns on the Express L128FP TFTP
server function and allows its code to be "cloned." Setting to No (def)
will deny any request from TFTP clients.
» Utilities/Exit
Write security: 5; Read security: 5
Activating this feature will exit the terminal session from the mainte-
nance port or Telnet. It is equivalent to the key combination
61202070L4-20
Chapter 3. Terminal Menu Operation and Structure
Express L128FP User Manual
to display a simple
Return
.
Control L
3-75