Table of Contents
Advertisement
»» Upgrade/Status
This appears when TFTP is used. It displays the status of the transfer
as it happens. Any error or success message will be displayed here.
»» Upgrade/Start Transfer
This activator is used when the configurable items in this menu are
complete.
Once started, the Express 6100/6120 will prompt for erasing
the flash. When the flash is erased and the upgrade transfer
fails, do not turn off the unit. Retry the transfer until
successful. Otherwise, if power is removed before upgrade has
finished, the upgrade will have to occur from the maintenance
port using XMODEM. If this happens, set a PC terminal
emulation program to 9600 baud and attach to the Express
6100/6120's maintenance port. Press
simple terminal menu for upgrading. This menu appears
when the flash code has been erased or is corrupt. The menu
will also appear if you power up with the back panel switch
one in the up position.
»» Upgrade/Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
»» Upgrade/TFTP Server
Setting this to Yes allows another Express 6100/6120 to upgrade its
code using TFTP client. This, in effect, turns on the Express 6100/6120
TFTP server function and allows its code to be "cloned." Setting to No
(def) will deny any request from TFTP clients.
» Utilities/Exit
Write security: 5; Read security: 5
Activating this feature will exit the terminal session from the mainte-
nance port or Telnet. It is equivalent to the key combination
61200176L1-1
Express 6100/6120 User Manual
Chapter 3. Terminal Menu Operation and Structure
Return
to display a
.
Control L
3-75
Advertisement
Chapters
Table of Contents
