Running A Maintenance Item - Kyocera Mita KM-1530 Service Manual

2AV/X

(2) Running a maintenance item

1-6
Yes
1-6-2
Start
Enter "10871087" using
the numeric keys.
Enter the maintenance item
number using the cursor up/down keys
(20 cpm), the zoom +/– keys (15 cpm)
or numeric keys.
Press the start key.
The selected maintenance item is run.
Press the stop/clear key.
Yes
Repeat the same
maintenance item?
No
Run another maintenance
item?
No
Enter "001" using the cursor up/down
keys (20 cpm), the zoom +/– keys (15 cpm)
or numeric keys and press the start key.
End
Maintenance mode is entered.
The maintenance item is
selected.
Maintenance mode is exited.