Adjusting Magnification Of The Scanner In The Auxiliary Scanning Direction - Kyocera Mita KM-1530 Service Manual

2AV/X

(9) Adjusting magnification of the scanner in the auxiliary scanning direction

Perform the following adjustment if the magnification in the auxiliary scanning direction is not correct.
U053
(P. 1-4-11)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
• 20 cpm
Enter "065" using the numeric keys.
(auxiliary scanning direction).
1-6
Place an original and press
the start key to make a test copy.
1-6-34
U065
(main scanning
direction) (P. 1-6-32)
Start
Enter maintenance mode.
Press the start key.
Select "SUB SCAN ADJ"
Press the interrupt key.
Is the image correct?
Yes
Press the stop/clear key to
exit maintenance mode.
End
U065
U070
(auxiliary scanning
(P. 1-4-14)
direction)
Original
Press the start key.
For copy example 1, increase the
value using the cursor right key.
No
For copy example 2, decrease the
value using the cursor left key.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
Copy
Copy
example 2
example 1
Figure 1-6-50a
The new setting
is stored.