Periodic Maintenance Procedures - Kyocera Mita KM-1530 Service Manual

2AV/X

Periodic maintenance procedures

• Copier
Section
Test copy and
test print
Section
Paper feed
section
Section
Optical section
2-4
2-4-12
Maintenance
part/location
Perform at the maximum Test copy
copy size
Maintenance
part/location
Right registration roller Clean
Left registration roller Clean
Upper paper feed pulley Clean
Bypass paper feed pulley Clean or replace
Left registration cleaner Clean or replace
assembly
Right registration cleaner Clean or replace
assembly
Upper paper feed clutch Check
Rollers Clean
Paper conveying unit Check and grease
Lower paper feed pulley Clean
Lower paper feed clutch Check
Paper feed roller Clean
Maintenance
part/location
Slit glass Clean
Contact glass Clean
Mirror 1 Clean
Mirror 2 and mirror 3 Clean
Scanner lens Clean
Reflector Clean
Exposure lamp Clean or replace
Optical rail Grease
Method Maintenance cycle
Every service
Method Maintenance cycle
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Method Maintenance cycle
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Every service
Points and cautions
Points and cautions
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Replace after feeding 200,000
sheets. Vacuum.
Replace after feeding 200,000
sheets. Vacuum.
Check the leading edge
registration and paper feed
conditions in the registration
section, bypass and paper feed
section.
Clean with alcohol or a dry cloth.
Check noise. If noise is heard,
apply grease TMP-200G to the
contacting surfaces of the paper
conveying unit and bushing.
Clean with alcohol or a dry cloth.
Check the leading edge
registration and paper feed
conditions in the registration
section, bypass and paper feed
section.
Clean with alcohol or a dry cloth.
Points and cautions
Clean with alcohol and then
a dry cloth.
Clean with alcohol and then
a dry cloth.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Clean with a dry cloth only if
vertical black lines appear on the
copy image.
Clean with a dry cloth only if
vertical black lines appear on the
copy image.
Replace if an image problem
occurs or after feeding
200,000 sheets.
Check noise and shifting and
then apply scanner rail grease
PG671.
Page
Page
1-6-3
1-6-6
1-6-8
1-6-8
1-6-5
Page
1-6-19