Gear - Kyocera Mita KM-1530 Service Manual

2AV/X
Maintenance
item No.
U033 Checking solenoid operation
Description
Turns each solenoid on.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key. A selection item appears.
2. Select the desired operation using the copy exposure adjustment keys.
3. Press the start key. The selected operation starts.
Display
b1
b2
A
* Optional.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-4
U034 Adjusting the print start timing
Adjustment
See pages 1-6-10 and 13.
U035 Setting folio size
Description
Changes the image area for copying onto folio size paper.
Purpose
To prevent the image at the trailing edge, or right or left side of the paper from not being copied by setting the
actual size of the folio paper used.
Method
Press the start key.
Setting
1. Select the item by lighting a copy exposure indicator using the copy exposure adjustment keys.
2. Change the setting using the zoom +/– keys.
Copy exposure indicator
Exp. 1
Exp. 2
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U051 Adjusting the amount of slack in the paper
Adjustment
See page 1-6-17.
1-4-60
Description
Operation
Turning the feedshift solenoid (FSSOL)* on
Turning the feedshift solenoid (FSSOL)* off
Turning the main switch off
Setting Setting range
Length 330 to 356 mm
Width 200 to 220 mm
Initial setting
330
210