Installing The Scanning System (Option) - Kyocera Mita KM-3530 Service Manual

1-3-12 Installing the Scanning System (option)

Procedure
1. Remove 13 screws and take off the rear
cover.
• If the printing system is installed
2. Remove the 2 screws holding the printer
system in place, and pull the printing system
out of the shield cover.
3. Remove 13 screws and take off the shield
cover.
Figure 1-3-93
Printer system
Screws
Figure 1-3-94
Figure 1-3-95
2BH/J
Rear cover
Screws
Shield cover
Screws
1-3-45