Connecting To The Usb Port - Konica Minolta DI1611 - TWAIN DRIVER Manual

Connecting to the USB Port

2 Connecting to the USB Port
Important!
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
1
Make sure that the copier and the computer to be connected to the
copier are turned OFF.
2
Connect one end of the USB cable to the USB port of the copier.
This completes the connection.
Note
USB1.1 is only supported on Windows 98, Windows Me, Windows
2000, and Windows XP.
Di1611/Di2011 Twain Driver
Connect
PC
Copier
2
2-1