Rear Panel - D-Link DES-3326 User Manual

24-port NWay Ethernet Switch User's Guide
An RS-232 DCE console port for setting up and managing
the switch via a connection to a console terminal or PC
using a terminal emulation program.
A front-panel slide-in module slot for Gigabit Ethernet
ports can accommodate a 2-port 1000BASE-T Gigabit
Ethernet module, a 2-port 1000BASE-SX Gigabit Ethernet
module, a 2 -port 1000BASE-LX Gigabit Ethernet module,
or a 2-port GBIC-based Gigabit Ethernet module.
One switched MDI-X/MDI-II Uplink port that can be used to
connect a straight-through cable or a crossed cable to a
normal (non-Uplink) port on a switch or hub. This port is
identical to the other 23 ports except for the ability to use
a crossed or a straight-through cable.
Twenty-three high-performance, NWay Ethernet ports all
of which operate at 10/100 Mbps for connections to end
stations, servers and hubs. All ports can auto-negotiate
between 10Mbps or 100Mbps, full or half duplex, and flow
control.

Rear Panel

The rear panel of the switch consists of a slot for the optional
DPS-1000 (Redundant Power Supply) and an AC power connector.
Figure 3-2. Rear panel view of the Switch
The AC power connector is a standard three-pronged
connector that supports the power cord. Plug-in the female
20 Identifying External Components